T2A01:

Which of the following is a common repeater frequency offset in the 2 meter band?

1. Plus or minus 5 MHz
2. Plus or minus 600 kHz
3. Plus or minus 500 kHz
4. Plus or minus 1 MHz

T2A02:

What is the national calling frequency for FM simplex operations in the 2 meter band?

1. 146.520 MHz
2. 145.000 MHz
3. 432.100 MHz
4. 446.000 MHz

T2A03:

What is a common repeater frequency offset in the 70 cm band?

1. Plus or minus 5 MHz
2. Plus or minus 600 kHz
3. Plus or minus 500 kHz
4. Plus or minus 1 MHz

T2A04:

What is an appropriate way to call another station on a repeater if you know the other station's call sign?

1. Say "break, break," then say the station's call sign
2. Say the station's call sign, then identify with your call sign
3. Say "CQ" three times, then the other station's call sign
4. Wait for the station to call CQ, then answer it

T2A05:

How should you respond to a station calling CQ?

1. Transmit "CQ" followed by the other station's call sign
2. Transmit your call sign followed by the other station's call sign
3. Transmit the other station's call sign followed by your call sign
4. Transmit a signal report followed by your call sign

T2A06:

Which of the following is required when making on-the-air test transmissions?

1. Identify the transmitting station
2. Conduct tests only between 10 p.m. and 6 a.m. local time
3. Notify the FCC of the transmissions
4. All of these choices are correct

T2A07:

What is meant by "repeater offset?"

1. The difference between a repeater's transmit frequency and its receive frequency
2. The repeater has a time delay to prevent interference
3. The repeater station identification is done on a separate frequency
4. The number of simultaneous transmit frequencies used by a repeater

T2A08:

What is the meaning of the procedural signal "CQ"?

1. Call on the quarter hour
2. A new antenna is being tested (no station should answer)
3. Only the called station should transmit
4. Calling any station

T2A09:

What brief statement indicates that you are listening on a repeater and looking for a contact?

1. The words "Hello test" followed by your call sign
2. Your call sign
3. The repeater call sign followed by your call sign
4. The letters "QSY" followed by your call sign

T2A10:

What is a band plan, beyond the privileges established by the FCC?

1. A voluntary guideline for using different modes or activities within an amateur band
2. A mandated list of operating schedules
3. A list of scheduled net frequencies
4. A plan devised by a club to indicate frequency band usage

T2A11:

What term describes an amateur station that is transmitting and receiving on the same frequency?

1. Full duplex
2. Diplex
3. Simplex
4. Multiplex

T2A12:

Which of the following is a guideline when choosing an operating frequency for calling CQ?

1. Listen first to be sure that no one else is using the frequency
2. Ask if the frequency is in use
3. Make sure you are in your assigned band
4. All of these choices are correct